WiFi Access Point support mesh, Equipped with Qualcomm IPQ5018 enterprise chipset,up to 150 users access and enjoy the high speed Ethernet
Product Description
KS-AP625 is high RF power, high speed, high performance Wi-Fi6 ceiling wireless access point support AP, router and Easy mesh. Equipped with Qualcomm IPQ5018 enterprise chipset, it is 2.4G+5.8G dual band, 160MHz bandwidth, up to 3000Mbps data rate, support 802.1kvr seamless roaming, up to 150 users access and enjoy the high speed Ethernet. Besides that, it support Mesh, Vlan, Work with AC controller and cloud, it support central and remote management, captive portal authentication, SMS function, SD-LAN, VPN, it is the best choice for wireless coverage in hotels, offices, schools ect...
Main Features:
1. Ceiling mounted design, high power amplifier design with 1000mW RF power, unobstructed signal, more wireless range and stable wireless connections.
2. High performance enterprise CPU, world-wide branded electronic IC, allow 150+ users to access and enjoy high speed Ethernet.
3. The wireless data rate up to 3000Mbps, 1G or 2.5G optional Ethernet port, so easy apply to various network environments to achieve high-speed wireless coverage
4. Support 802.11kvr seamless roaming, users automatically switch to high stability signal but no Wi-Fi dropping
5. Support Easy Mesh, easy to expand the wireless network, achieve better wireless coverage
6. Support WPA3 and 802.1x advance encryption, guard wireless network security all the time
Detailed Photos
Product Parameters
| Hardware Spec: |
| Model |
KS-AP625 |
| WiFi Standard |
IEEE 802.11b/g/n/ac/ax |
| CPU |
IPQ5018 + QCA8081 PHY chipset + QCN6102/QCN6122 |
| Flash |
8MB_SPI_NOR Flash+128MB_SPI_L NAND Flash |
| Memory |
512MB |
| Frequency |
2.4G: 2400 - 2484MHz |
| 5.8G: 5150 - 5850MHz |
| Data Rate |
600Mbps @ 2.4GHz; 2400Mbps @5.8GHz |
| RF Power |
2.4G 11b≤28dBm/chain, 11n HT20≤24dBm/chain, 11ac HT40≤23dBm/chain, 11ax HT40≤17dBm/chain
5.8G 11n≤27 dBm/chain; 11ac≤23 dBm/chain; 11ax≤18 dBm/chain; |
| Access Users |
150+ Clients |
| Ethernet |
Optional 1:
1*2.5G WAN, PoE Input,RJ-45;
1* 10/100/1000Mbps LAN,RJ-45 |
| Optional 2: 1*1G WAN, PoE Input,RJ-45; |
| Button |
Reset button |
| LED Indicator |
SYS (Green) |
| 2.4G(Green) |
| 5.8G(Green) |
| Antenna |
Build in 5dBi MIMO Antenna |
| Power Consumption |
<23W |
| DC Power Supply |
Input 12V / 2A (DC); 2.5GE/PoE, IEEE 802.3at standard |
| MTBF |
≥85000H@25ºC |
| Working temperature |
Working Temperature:-20ºC~55ºC |
| Storage temperature: -40ºC~70ºC |
| Humidity |
5%~95% |
| Dimensions |
195x195x30mm |
| Firmware Features |
| Operation mode |
AP, router and mesh |
| Wireless Functions |
Multiple SSID functions: 2.4GHz: 8; 5.8GHz: 8. |
| Support SSID hidden |
| Support seamless roaming, 802.11kvr standard. |
| Support 5G Prior for a faster Ethernet. |
| Support MAC filter, IP filter |
| VPN |
Open VPN and VPN Client (L2TP PPTP), IPSec |
| Firewall |
Port mapping, Host mapping, DMZ, access control, |
| Security |
Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x, WPA3 |
| Authentication |
Captive portal authentication, Billing, PPPoE authentication, WiFidog authentication, CMCC portal, Radius server, LADP server, SMS authentication; |
| IP Protocol |
IPv4/IPv6 |
| SD-LAN |
Support when it work with AC controller |
| AP management |
AP group, RF adjusting, network topology generate, RF power setting, channel setting, IP address setting |
| Device Management |
GUI web management |
| AC controller central and remote management |
| Cloud central and remote management |
| Support firmware back-up, restore, reset, upgrade |
Packing List
|
KS-AP625*1
Cat 6 LAN Cable×1(1 meter)
User Manual×1
|
Packaging & Shipping
Gift box + Carton box;
23PCS/CTN,
17KGS/CTN
CTN size: 59*50*23cm
After Sales Service
2 Years warranty;
Provide components always if you can repair it;
Provide 7*12 hours after-sales technical support;
FAQ
Q1. What's kind of operation mode it support:
A: AP, mesh and router, can use it in any environment to provide stable wireless signal;
Q2. If work with AP controller:
A: Yes, worked with AP controller in MQTT protocol;
The AP controller can be gateway or AP controller bypass mode;
After work with AP controller, it support AP central management,AP group management, multiple authentications like SMS, email, account auth, radius auth, facebook auth..., can generate the working diagram automatically.
We can send you the AP controller's remote control link, you can login and check the functions before samples purchase;
Q3. If work with cloud:
A. Yes, worked with cloud management, support AP configure, AP group configure, AP location configure...
What's more, can support SDN if want;
Can send you the cloud and AP's remote control link, you can login to check the AP's web interface and cloud function in advance before samples purchase;
Q4. If support out of China production:
A. Yes, this is developed by our engineers, we can support SKD and CKD;
We can provide the SOP of assemble and finished product testing;
But for the CKD, firstly you can do the RF calibration, 2nd you should have engineer to debug the problem;
We can provide SOP or all documents, and we can send engineers to provide technical support, but will be costly.
Q5. What's the OEM and ODM service?
A: OEM: provide your LOGO to us, we can add your LOGO on the product, firmware and package;
Content will be limited by MOQ;
ODM: we can provide PCBA, housing and firmware ODM service:
PCBA: 2~3 month to finish it;
Housing: 2 month after finish the PCBA;
Firmware: we can provide the open source driver for customer to develop their firmware;
We can provide DTS files if want;
And we can provide technical support in customer firmware development.
